ELECTRONIC DEVICE FOR THE CONTROL OF ELECTRIC PUMPS EQUIPPED WITH TIMER
A modern design for Brio2000-T, the electronic device designed to control the flow and the pressure in the water systems provided with an electric pump, being able to star the pump automatically, further to a stop due to dry running (water lack).

GENERAL CHARACTERISTICS
Substantially, Brio2000-T works like Brio2000 from which it comes from. However, the new system integrates the special function of “automatic reset” which allows the pump, when it has been stopped because of lack of water, to carry out some brief regular starting in order to verify - in total autonomy - an eventual new water availability in the suction line.
In case of during one of these tests the pumps succeeds in priming water, the system re-starts working normally, otherwise Brio2000-T keeps on trying until the pre-set number of testing has been reached. Once that limit has been overcome, the device stops the pump definitively and its re-start can be effected only manually by pushing the reset button.
To assure the maximum flexibility, Brio2000-T is available in 6 different versions with different pre-set combinations changing in intervals and number of testing with which the device performs the automatic-reset function:

Intervals Number ot testing 30 min 4 8 60 min 2 4

Brio2000-MT version is further equipped with a built-on pressure gauge that consents the visualization of the starting-pressure, of the pressure in the water systems and even eventual water leakages in the installation.

Brio2000-T and Brio2000-Mt replace completely the traditional system made of pressure switch and pressure tank.

The attention for the raw-material sourcing and the care reserved to all the working phases are of course the same that already distinguished us with the production of Brio2000 and Brio2000-M.