BRIO DUAL SET

DISPOSITIVO ELETTRONICO DIGITALE PER CONTROLLO DI ELETTROPOMPE

NO HAMMERING

COMPACT

ENHANCED FEATURES

Brio Dual Set

The digital pressure switch that simplifies the management of your pump.

Double setting: set both the minimum and maximum pressure from 1 to 6 bar with a simple button!

Integrated 3-way connection that allows direct installation with the pressure tank.

ELECTRONIC CONTROLLERS

PROTECTION AGAINST DRY RUNNING

PRODUCT DETAILS

Download product informations

Schede Prodotto PDF:

RESERVED DOCUMENTS

Download reserved documents

You must log in to access these files
Click here to login

Automatically controls the start and stop of the electric pump based on adjustable pressure values.
Digital pressure indication via LED scale.
Minimum and maximum pressure adjustable from 1 to 6 bar within defined pressure ranges.
Integrates: pressure switch, pressure gauge, 3-way connection, and an inspectable non-return valve.
Starts the electric pump when pressure drops (tap opening) and stops it when liquid flow ceases at the pump’s maximum pressure (tap closing).
Dry-running protection.
Integrated automatic reset: after shutdown due to lack of water, it attempts to restart at predefined time intervals, for a total of 10 attempts (7h 15min).
Anti-block pump: after 24 hours of inactivity, the pump runs for 10 seconds to prevent rotor blockage.
Intelligent protection in case the stop pressure is not reached.
Maximum start protection: in case of continuous starts and stops due to loss of pre-charge pressure in the pressure tank, the device stops the pump after exceeding 30 starts per minute.

OPTIONAL

Version with electrical cables for motor and line connection.
Inlet and outlet hydraulic connections available in revolving nut or NPT versions.
Special plastic fittings for a quick installation.