Search form

Pressure and flow controllers

Items: 1 - 7 of 7 total


• Timed-start flowswitch for filling and emptying tanks for electric pumps up to 2hp.
Protects against dry running.
• Internal valve for detecting the water flow designed to allow the water column to be emptied.
Adjustable pump shutdown delay (10-30-60-120 seconds).
Autoreset interval and adjustable number of attempts (interval between tests 15-30-60-120 minutes, attempts 6-12-24-infinite).
• Easy to replace electronic card.




• Suitable for water pumping systems with pressure tank as digital pressure switch, or as flow and pressure controller.
Internal compartment dedicated to pump capacitor.
Available with 1" or 1 1/4" connection
• Pressure values adjustable via digital display.
• Pressure values and motor current showed on the display.







• Dry running protection device for use in booster sets in series with the traditional pressure switch.
• Internally adjustable stop delay of the pump from 10 to 180 seconds to enable filling of expansion tanks of various capacities.
• Available with SCHUKO socket or pre-fitted electric cables, that is a valid alternative to the external float switch (simplified electrical connection, suitable also for "do it by yourself").
• Automatic reset after a stop caused by dry running, standard time interval 60 min/4 tests.

Plumbing Connections

• Plastic plumbing connection with up to 10 bar guaranteed tightness
• 1 "or 1" 1/4 straight fitting
• Male or revolving female outlet connection available
• Fitting with 90 ° elbow available
• Quick installation thanks to the revolving connection
• Easy removal of the device from the system for short maintenance
• Internal rubber gasket replacing hemp or teflon, guarantees quick assembly and prevents check valve malfunctions
• Compatible with any control device available on the market
• Lower cost than brass connection