SPIN
ELECTRONIC FLOW SWITCH
Protecting the pump from lack of water is crucial. In traditional systems, already equipped with a pressure switch, it is possible to integrate a flow state for protection against dry running. The delay before the operation is adjustable in proportion to the volume of the expansion vessel.
Applications
Click here to login
Features
• Dry running protection device for use in booster sets in series with the traditional pressure switch.
• Internally adjustable stop delay of the pump from 10 to 180 seconds to enable filling of expansion tanks of various capacities.
• Available with SCHUKO socket or pre-fitted electric cables, that is a valid alternative to the external float switch (simplified electrical connection, suitable also for "do it by yourself").
• Automatic reset after a stop caused by dry running, standard time interval 60 min/4 tests.
Optionals – special arrangements
• Version with drilled check valve for water column drain.
• Version with electrical cables for motor and line connection.
• Hydraulic connections with revolving nut 1”F for pipe union.
• 1”plastic elbow for a quick installation of the device on the electric pump.
OTHER PRODUCTS
BRIO DIGITAL
BRIO DIGITAL
• Automatically controls the start of the electric pump when pressure drops (tap opening) and its stop when the fluid flow interrupts at the maximum pressure level of the electric pump (taps closing).
• The device represents the evolution of the traditional pressure booster system with mechanical pressure switch.
• Automatic reset with up to 10 attempts, providing a total coverage time of 7 hours and 15 minutes.
• 24-hour anti-seizure protection.
• Dry-run protection.
• Digital adjustment of the start pressure from 1 to 5 bar.
Features and materials
BOOSTER SETS
COMPLETE AND FUNCTIONAL
MODERN DESIGN
BRIO DUAL SET
BRIO DUAL SET
- Automatically controls the start and stop of the electric pump based on adjustable pressure values.
- Digital pressure indication via LED scale.
- Minimum and maximum pressure adjustable from 1 to 6 bar within defined pressure ranges.
- Integrates: pressure switch, pressure gauge, 3-way connection, and an inspectable non-return valve.
- Starts the electric pump when pressure drops (tap opening) and stops it when liquid flow ceases at the pump’s maximum pressure (tap closing).
- Dry-running protection.
Features and materials
NO HAMMERING
COMPACT
ENHANCED FEATURES
BRIO TANK DIGITAL
BRIO TANK DIGITAL
Features
Features and materials
NO HAMMERING
COMPACT
ENHANCED FEATURES
BRIO CROSS
BRIO CROSS
Features
Features and materials
BOOSTER SETS
COMPACT AND RELIABLE
INTELLIGENT
ARGO
ARGO
• Timed-start flowswitch for filling and emptying tanks for electric pumps up to 2hp.
• Protects against dry running.
• Internal valve for detecting the water flow designed to allow the water column to be emptied.
• Adjustable pump shutdown delay (10-30-60-120 seconds).
• Autoreset interval and adjustable number of attempts (interval between tests 15-30-60-120 minutes, attempts 6-12-24-infinite).
• Easy to replace electronic card.
Features and materials
BRIO TOP 2.0
BRIO TOP 2.0
• Suitable for water pumping systems with pressure tank as digital pressure switch, or as flow and pressure controller.
• Internal compartment dedicated to pump capacitor and PCB kit for fast connection with the pump.
• Available with 1" or 1 1/4" plastic connection
• Pressure values adjustable via digital display.
• Pressure values and motor current showed on the display.
Features and materials
BRIO TANK
BRIO TANK
Features
Features and materials
NO HAMMERING
COMPACT
ENHANCED FEATURES
