SPIN
FLUSSOSTATO ELETTRONICO
Proteggere la pompa dalla mancanza d’acqua è fondamentale. Nei sistemi tradizionali, già provvisti di pressostato, è possibile integrare un flussostato per la protezione contro la marcia a secco. Il ritardo prima dell’intervento è regolabile in proporzione al volume del vaso di espansione.
Applications
Click here to login
Caratteristiche
• Dispositivo di protezione contro la marcia a secco impiegato in gruppi di pressurizzazione in serie con il pressostato tradizionale.
• Ritardo allo spegnimento della elettropompa regolabile internamente da 10 a 180 secondi per permettere il riempimento di vasi di espansione di diverse capacità.
• Disponibile nella versione con presa Schuko integrata, valida alternativa al galleggiante esterno (collegamento elettrico semplificato, idoneo anche al fai da te).
• Reset automatico dopo un arresto per marcia a secco, intervallo standard 60 min/4 tentativi.
OPTIONALS
• Versione con valvola di ritegno forata per scarico colonna d’acqua.
• Versione dotata di cavi elettrici di collegamento per linea e motore.
• Connessioni idrauliche con raccordo girevole 1”F a bocchettone.
• Raccordo a 90° per una rapida installazione del dispositivo sull’elettropompa.
OTHER PRODUCTS
Plumbing Connections
Plumbing Connections
• Plastic plumbing connection with up to 10 bar guaranteed tightness
• 1 "or 1" 1/4 straight fitting
• Male or revolving female outlet connection available
• Fitting with 90 ° elbow available
• Quick installation thanks to the revolving connection
• Easy removal of the device from the system for short maintenance
• Internal rubber gasket replacing hemp or teflon, guarantees quick assembly and prevents check valve malfunctions
• Compatible with any control device available on the market
• Lower cost than brass connection
Features and materials
ARGO
ARGO
• Timed-start flowswitch for filling and emptying tanks for electric pumps up to 2hp.
• Protects against dry running.
• Internal valve for detecting the water flow designed to allow the water column to be emptied.
• Adjustable pump shutdown delay (10-30-60-120 seconds).
• Autoreset interval and adjustable number of attempts (interval between tests 15-30-60-120 minutes, attempts 6-12-24-infinite).
• Easy to replace electronic card.
Features and materials
BRIO TOP 2.0
BRIO TOP 2.0
• Suitable for water pumping systems with pressure tank as digital pressure switch, or as flow and pressure controller.
• Internal compartment dedicated to pump capacitor and PCB kit for fast connection with the pump.
• Available with 1" or 1 1/4" plastic connection
• Pressure values adjustable via digital display.
• Pressure values and motor current showed on the display.
Features and materials
SPIN
SPIN
Features
• Dry running protection device for use in booster sets in series with the traditional pressure switch.
• Internally adjustable stop delay of the pump from 10 to 180 seconds to enable filling of expansion tanks of various capacities.
• Available with SCHUKO socket or pre-fitted electric cables, that is a valid alternative to the external float switch (simplified electrical connection, suitable also for "do it by yourself").
• Automatic reset after a stop caused by dry running, standard time interval 60 min/4 tests.
Features and materials
PUMP PROTECTION
COMPACT AND VERSATILE
EASY INSTALLATION
BRIO TANK
BRIO TANK
Features
Features and materials
NO HAMMERING
COMPACT
ENHANCED FEATURES
FLUOMAC
FLUOMAC
Features
Features and materials
BOOSTER SETS
COMPACT AND RELIABLE
MODERN DESIGN
