FLUOMAC
DISPOSITIVI ELETTRONICI DI CONTROLLO PER ELETTROPOMPE
Compattezza ed affidabilità lo rendono il pressoflussostato più conosciuto e utilizzato nel mercato. Non necessita di alcuna manutenzione, protegge la pompa dalla mancanza di acqua e si installa in pochi minuti.
Un prodotto di qualità assolutamente indispensabile per una soluzione ai problemi di pressurizzazione domestica.
Applications
Click here to login
CARATTERISTICHE
• Controlla automaticamente l’avvio e l’arresto di elettropompe monofase (superficie, verticali e sommerse).
• Sostituisce totalmente il sistema tradizionale composto da pressostato e vaso di espansione.
• Avvia l’elettropompa in seguito alla diminuzione di pressione (apertura rubinetti) e la arresta quando si interrompe il flusso del liquido alla massima pressione dell’elettropompa (chiusura rubinetti).
• Protegge contro la marcia a secco.
• Pressione di intervento regolabile.
• Installazione in qualsiasi posizione – verticale od orizzontale.
• Scheda elettronica di facile sostituzione.
• Manutenzione nulla.
• Installazione in modalità by-pass.
OPTIONALS
• Reset automatico dopo un arresto per marcia a secco; intervallo standard 60 min/4 tentativi (BRIO2000-MT).
• Versione dotata di cavi elettrici di collegamento per linea e motore.
• Connessioni idrauliche con raccordo girevole 1”F a bocchettone.
• Versioni a 24 V.
• Raccordi speciali in plastica per una rapida installazione.
• Raccordo a T in plastica.
OTHER PRODUCTS
BRIO DUAL SET
BRIO DUAL SET
- Automatically controls the start and stop of the electric pump based on adjustable pressure values.
- Digital pressure indication via LED scale.
- Minimum and maximum pressure adjustable from 1 to 6 bar within defined pressure ranges.
- Integrates: pressure switch, pressure gauge, 3-way connection, and an inspectable non-return valve.
- Starts the electric pump when pressure drops (tap opening) and stops it when liquid flow ceases at the pump’s maximum pressure (tap closing).
- Dry-running protection.
Features and materials
NO HAMMERING
COMPACT
ENHANCED FEATURES
BRIO TANK DIGITAL
BRIO TANK DIGITAL
Features
Features and materials
NO HAMMERING
COMPACT
ENHANCED FEATURES
BRIO CROSS
BRIO CROSS
Features
Features and materials
BOOSTER SETS
COMPACT AND RELIABLE
INTELLIGENT
Plumbing Connections
Plumbing Connections
• Plastic plumbing connection with up to 10 bar guaranteed tightness
• 1 "or 1" 1/4 straight fitting
• Male or revolving female outlet connection available
• Fitting with 90 ° elbow available
• Quick installation thanks to the revolving connection
• Easy removal of the device from the system for short maintenance
• Internal rubber gasket replacing hemp or teflon, guarantees quick assembly and prevents check valve malfunctions
• Compatible with any control device available on the market
• Lower cost than brass connection
Features and materials
ARGO
ARGO
• Timed-start flowswitch for filling and emptying tanks for electric pumps up to 2hp.
• Protects against dry running.
• Internal valve for detecting the water flow designed to allow the water column to be emptied.
• Adjustable pump shutdown delay (10-30-60-120 seconds).
• Autoreset interval and adjustable number of attempts (interval between tests 15-30-60-120 minutes, attempts 6-12-24-infinite).
• Easy to replace electronic card.
Features and materials
BRIO TOP 2.0
BRIO TOP 2.0
• Suitable for water pumping systems with pressure tank as digital pressure switch, or as flow and pressure controller.
• Internal compartment dedicated to pump capacitor and PCB kit for fast connection with the pump.
• Available with 1" or 1 1/4" plastic connection
• Pressure values adjustable via digital display.
• Pressure values and motor current showed on the display.
Features and materials
SPIN
SPIN
Features
• Dry running protection device for use in booster sets in series with the traditional pressure switch.
• Internally adjustable stop delay of the pump from 10 to 180 seconds to enable filling of expansion tanks of various capacities.
• Available with SCHUKO socket or pre-fitted electric cables, that is a valid alternative to the external float switch (simplified electrical connection, suitable also for "do it by yourself").
• Automatic reset after a stop caused by dry running, standard time interval 60 min/4 tests.
Features and materials
PUMP PROTECTION
COMPACT AND VERSATILE
EASY INSTALLATION
BRIO TANK
BRIO TANK
Features
Features and materials
NO HAMMERING
COMPACT
ENHANCED FEATURES
FLUOMAC
FLUOMAC
Features
Features and materials
BOOSTER SETS
COMPACT AND RELIABLE
MODERN DESIGN
